Editor In Chief

Calculate the recommended rim width in inches based on tire section width, tire aspect ratio, wheel diameter, and intended fitment style.

Calculate remaining usable tread depth and estimated tread life percentage based on current tread depth, original tread depth, and legal minimum tread depth.

Estimate the combined weight of a wheel and tire assembly using wheel diameter, wheel width, tire section width, tire aspect ratio, and wheel material. The calculation uses a simplified real-world model based on wheel size and tire volume.

Calculate the effective final drive ratio after changing tire size compared with the original setup. This helps estimate how a new tire diameter affects gearing and engine RPM.

Calculate tire revolutions per minute (RPM) from vehicle speed, tire diameter, and optional correction factors for real-world loaded radius and tread wear. Useful for drivetrain planning, speedometer checks, and comparing tire setups.

Estimate the operating cost of a tire per mile by dividing the installed tire cost plus expected maintenance cost by the usable tread life in miles. Useful for comparing tire options across purchase price, installation, maintenance, and expected lifespan.

Estimate the total cost to replace tires based on quantity, tire type, wheel size, brand tier, installation package, and local labor pricing.

Estimate how many miles your tires may last based on treadwear rating, annual driving distance, average load, maintenance habits, and road conditions.

Estimate tire tread wear per 1,000 miles based on driving distance, current tread depth, tire age, inflation condition, and driving style. This helps project how quickly usable tread is being consumed under typical operating conditions.

Estimate the remaining tire tread as a percentage based on current tread depth, original new tread depth, and the legal minimum tread depth. Useful for checking tire wear and planning replacement.

Estimate the recommended miles until your next tire rotation based on miles since last rotation, driving conditions, tire type, drivetrain, and average monthly mileage.

Calculate estimated tire revolutions per mile using tire diameter, tread wear, and loaded radius adjustment. This helps compare tire sizes and estimate wheel rotations over one mile of travel.

Estimate the total safe load capacity supported by a set of tires based on load index, tire count, inflation condition, and service factor. This calculator applies practical derating for underinflation and operating severity to help estimate usable load capacity.

Estimate recommended cold tire pressure based on vehicle door placard pressure, ambient temperature, vehicle load, driving speed, and tire condition. This calculator provides an adjusted tire pressure target for everyday use and should not replace manufacturer recommendations.

Calculate wheel backspacing from wheel width, offset, and lip thickness. Backspacing is the distance from the wheel mounting pad to the inner wheel edge.

Calculate wheel offset in millimeters based on wheel width, backspacing, spacer thickness, and mounting face position. Useful for comparing fitment and determining final effective offset.

Estimate the overall tire diameter difference when plus sizing from an original tire to a new tire using section width, aspect ratio, and wheel diameter. This helps compare how closely a plus-sized tire matches the original setup.

Compare an alternate tire size to an original tire size by calculating the percentage difference in overall diameter using section width, aspect ratio, and wheel diameter for both sizes.

Calculate odometer error caused by changing tire size by comparing original and new tire dimensions. Enter tire width, aspect ratio, and wheel diameter for both tire sizes to estimate how much the odometer reading differs from actual distance traveled.

Calculate the actual vehicle speed based on original and new tire sizes to estimate speedometer error caused by changing tire diameter.

Calculate tire sidewall height from tire width and aspect ratio. Optionally convert the result between millimeters and inches.

Compare annual driving energy costs for a gasoline car versus an electric car based on miles driven, fuel economy, electricity use, gas price, and electricity rate.

Calculate a tire’s circumference from its width, aspect ratio, wheel diameter, and quantity. The calculator estimates overall tire diameter using standard tire sizing and then computes circumference.

Calculate the overall tire diameter from tire width, aspect ratio, and wheel diameter using the standard tire sizing formula.

Compare two tire sizes by calculating the difference in overall diameter, sidewall height, circumference, and speedometer reading impact based on width, aspect ratio, and wheel diameter.

Calculate overall tire diameter from tire width, aspect ratio, and wheel diameter, with an option to compare against a second tire size as a percent difference.

Estimate the cost to charge an electric vehicle at home based on battery size, current charge level, target charge level, charging efficiency, and your electricity rate.

Estimate the cost per mile to drive an electric car using electricity price, vehicle efficiency, home charging losses, and optional public charging usage.

Estimate the cost to charge an electric car based on battery size, current and target charge levels, charging losses, and electricity rate.

Estimate annual fuel cost savings from driving a hybrid vehicle instead of a conventional gas vehicle based on miles driven, fuel economy, fuel price, and the share of driving where hybrid efficiency benefits are strongest.